| |
|
 |
相关文章 |
 |
|
|
|
|
 |
MCSE微软系统工程师考试-Networking Essentials 试题 2_微软认证模拟题库,微软认证,计算机考试(1) |
|
|
| MCSE微软系统工程师考试-Networking Essentials 试题 2_微软认证模拟题库,微软认证,计算机考试(1) |
|
作者：佚名 文章来源：不详更新时间：2006-5-30 8:32:09  |
|
1. What is the higher protocol for NetBIOS ?
A: DLC
B: SMB
C: OSI
D: XNS
E: TCP/IP
2. How can you divide an IP-Adress into Networkadress and Hostadress ?
A: WINS
B: DHCP
C: Subnet mask
D: MAC
3. Which is a feature of 10BaseT
A: Coax
B: STP
C: RG-58 A/U
D: UPT
4. Which adress makes an Network Interface Card unique ?
A: Ip-Number
B: MAC-Adress
C: IRQ
D: Type of tranceiver
5. Which of the following OS support share-level-security ?
A: Windows for Workgroups
B: Windows 95
C: Windows NT Workstation
D: Windows NT Server
6. What are the advantages of NDIS and ODI ?
7. You want to connect a Client-Computer to an IBM 3090 running a terminal-emulation-programm on the client but you don’t want to change the
protocol. What do use ?
A: Repeater
B: Router
C: Gateway
D: Hub
18. You have a Network running TCP/IP . What do you use to segment the
network ?
A: Repeater
B: Router
C: Gateway
D: Switch
19. You have two seperate Ethernet-networks you want to connect together.
They use NetBEUI and NWLink. What device do you use ?
A: Router
B: Bridge
C: Gateway
D: Hub
11. What kind of protocol do you use for assured delivery ?
A: connection oriented
B: connection less
12. What connectivity device functions at the network-layer ?
A: router
B: gateway
C: hub
D: repeater
13. Where do you need to be careful in not providing two equal NETBIOS names ?
Choose all that apply.
A: workgroup name
B: computer name
C: domain name
D: share name
14. Which of the following examines packets
A: TDR
B: protocol analyser
C: SNMP
D: performance monitor
15. Which of the following supports compression and error control ?
A: SLIP
B: PPP
C: DLC
D: LAT
共3页: 1 [2] [3] 下一页
16. Which is a feature of 100BaseT
A: Fibre Optic
B: T-connector
C: 50(-Restistance
D: UTP Cat. 5
17. You have 5 WAN-Networks using TCP/IP, NWLink,NetBEUI. Which of the
following Data-Link-protocoll do you use ?
A: SLIP
B: PPP
C: DLC
18. What type of server do you have if it provides specific applications
for a client computer ?
A: File storage and Print server
B: application server
19. Which WAN can provide bandwith on demand ?
A: X.25
B: Frame Relay
C: ATM
D: FDDI
20. You want to connect several Windows95 computer together with several
MS-DOS computer that are using a Netware DOS Requester. What protocol do
you use ?
A: NetBEUI
B: TCP/IP
C: NWLink
D: DLC
21. You have a Network using TCP/IP. You want to reduce traffic on the
network. What do you use ?
A: Router
B: Bridge
C: Gateway
D: Hub
22. Which WAN can run at more than 100Mbit/s ?
A: X.25
B: ATM
C: Frame Relay
D: FDDI
23. You have 3 NT-Servers and 75 clients using NetBEUI. You want to
connect your clients to an UNIX Station that is using NFS. But you don't
want to change protocol. What do you use ?
A: Router
B: Bridge
C: Gateway
D: Hub
24. You have a small company that is moving for only 6 month in another
building. There are no network cables in the building. You want to connect
7 computers together. What kind of topology do you use ?
A: MESH
B: BUS
C: RING
D: STAR
25. What kind of Medium do you use for 100Mbit/s ?
A: RG-58 A/U
B: FDDI
C: UTP Cat. 5
D: UTP Cat. 3
26. You want to install a backbone between two buildings that reside 1000
m from each other. What kind of medium do you use ?
A: UTP Cat 5.
B: Fibre optic
C: radio transmission
D: RG-62
27. You want to connect an Ethernet-network with a Token-Ring-network with
fibre optic cable. What device do you use to have flow control, broadcast
management and several communication paths ?
A: Router
B: Brouter
C: Gateway
D: Switch
28. You want to install an 100Mbit/s Ethernet-network. Above your ceiling
having about 1m of free space. You need to minimise costs. What medium do
you use ?
A: Coax
B: STP
C: UTP Cat. 5
D: Fibre optic
29. You want to install an Peer-to-peer network running Windows 95. What
kind of protocol do you use ?
A: TCP/IP
B: NWLink
C: DLC
D: XNS
30. You have 300 client computers that are connected over a WAN with a
56kbit/s link to a database-server. The users reclaim slow access to the
database-server. The databas-server is already optimized. What can you do ?
A: Add more RAM to the server an the clients.
B: Change the 56kbit/s link to T1.
C: Change networkcards to 32 bit
共3页: 上一页 [1] 2 [3] 下一页
31. Which WAN gives you the most reliable connection ?
A: X.25
B: ATM
C: Frame Relay
D: ISDN
32. You have an network running NetBEUI. You change your protocol to
TCP/IP. You can ping your server only by ist IP-Number but not by ist
NetBIOS name. What is wrong ?
A: Your client is not declared in the WINS-server
B: The server is not declared in the WINS-Server
C: You must change protocol
D: You must change the frame type
33. You have two network interface cards with the following
implementation. MAC-Adress: 020303427, IRQ 5, Adress 300. When you install
both network cards your network does not function. What is wrong ?
A: MAC adress may not be the same.
B: IRQ may not bee the the same
C: The Base adress may not be the same
34. Suzies computer has no connection to the network anymore. The other
clients are working well. What is wrong?
A: The cable between the server and the network broke.
B: The cable of Suzies computer is loose.
C: Suzies computer needs more RAM
D: The frame type is incorrect
35. Peters computer has no connection to the network. The driver does not
initalise correctly. The other clients are workling well. What can you do ?
A: Check the cable between the server and the network with a TDR.
B: Check the cable of Peters computer with a TDR.
C: Check the NIC with a diagnose program.
36. If you want to copy a file from an Ethernet-network to a
Token-Ring-network it takes 30 seconds. If you want to copy a file from a
Token-Ring-network to an Ethernet-network to it takes 2 minutes. Why ?
A: The frame size of the Ethernet is larger
B: The frame size of the Token-Ring is larger
C: The Ethernet is quicker.
D: The Token Ring network uses another protocol
37. You have the following Exhibit:
x x Terminator
0 0 Computer / Server
| + Ground
x0------0---------------------------0----------0x+
The network does not work correctly. What must you correct ?
A: Change the network so you only have two terminators
B: Change all terminators to 25( and ground at each terminator
C: Change cable to RG-58/U
D: Run another protocol
38. You have an network running NWLink. You connect a new computer on the
network. The NIC installs properly but you cannot access the network. What
is wrong ?
A: Wrong IRQ
B: Wrong protocol
C: Wrong frame type
D: Wrong MAC adress
共3页: 上一页 [1] [2] 3
|
|
| 文章录入：admin 责任编辑：admin |
| |
|
上一篇文章： MCSE微软系统工程师考试-NT Server 4.0 试题 3_微软认证模拟题库,微软认证,计算机考试(1)
下一篇文章： MCSE微软系统工程师考试-NT Server 4.0 试题 1_微软认证模拟题库,微软认证,计算机考试(1) |
|
|
| 【字体：小 大】【发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口】 |
|
|
|
|
|
